Simple to use electronic pump controller. It enables the pump to turn on when the household tap is opened and turns off when the tap is closed. Also provides dry-run protection when the rainwater tank is empty. If the rainwater tank is empty re-start the pump every 24 hours to see if it has rained.

Electronic Pump Controller

• It allows automatic pump operation: It starts the pump when the tap is turned on and stops it about 10 seconds after the tap is turned off.
• It protects the pump from dry operation: It stops the pump when there is no flow of water, thus preventing possible damage to the pump. This alarm is indi­cated by the LED called FAILURE on the front of the device.
• It ensures constant flow and pressure.
• 24-hour automatic restart to test for rainwater
• Easy plug-and-play installation

The controller has a 3-pin socket for the pump to be plugged into and a 3-pin plug to connect to the electrical supply power-point.

Technical Data